One of the types of lathes used in the industry is lathe series machines. Lathe series machines are among the machines that are used to prepare a large number of similar pieces. among which we can mention Trab series machines. High quality machines that still have their own fans in Iran, and you can see many centers that use these machines.
Lathe series machines are one of the types of metal lathes that are used to produce a large number of parts that are needed equally. The following categories are:
• Manual lathe series machines
• Semi-automatic lathe series machines
• Automatic lathe series machines
• Horizontal lathe series machines
• Vertical lathe series machines
series machines with a carrier carrier carrier
This type of machine is fast and very easy to operate. This type of machine is used for small lathes, complex works and ordinary works. The diameter of the work that can be cut with this type of machine is up to 75 mm and sometimes up to 500 mm, and the cutting length of the parts must be proportional to the length of the cutter, which usually varies from 100 mm to 330 mm. In this type of machine, the six-sided pen holder is placed on the roller, and the four-sided pen holder is placed on the car rail transversely and has a transverse movement.
Longing Machine with the longitudinal Sprout Machine
These types of machines are basically made in a large form and are intended for heavy and large turning works, especially works that are relatively long in terms of length and must be precisely cut in terms of precision. With this type of machine, it is possible to cut works with a diameter of about 300 mm, and the works that must be closed in three systems have a diameter of about 900 mm. In these machines, the six-way grater device is closed directly on the saddle, which is located on the rail, and can be moved forward and backward along the length of the machine by means of the saddle. Fastening the six-sided pencil holder on the saddle directly maximizes the strength of the pen holder. In general, two types of turning (internal turning and surface turning) can be done with lathe series machines. Horizontal lathe series machines are usually used for turning.
Factors that must be respected in lavish series
- زمان تنظیم: زمانی که شخص (اپراتور) ابزارها را انتخاب و موقعیت را تثبیت میکند
- زمان بستن و اجرا عملیات بر روی قطعه کار: اگر سیستم اتوماتیک باشد اجرا کردن راحتتر صورت میگیرد
- زمان تراش کاری: زمان تراش کاری خود قطعه باید قسمت اعظم کل فرایند را دربرگیرد اما در عین حال باید حداقل باشد
- هزینه ابزار: با توجه به تیراژ کار انجام میشود
- هزینه نیروی انسانی